Contains >30% Oxygen-Based Bleaching Agents, <5% Anionic Surfactants, Non-Ionic Surfactants, Zeolite, Enzymes, Perfume
- Pack Type: Tub
Preparation and Usage
Mix 1/4 scoop of powder with 3/4 scoop of water
Apply mix on the stain
Rub the stain as needed
Clean & dry the scoop before placing back into tub
After pre treat was as usual
Add one scoop to 4L of water
6h max for whites
1h max for colours
After soaking wash as usual or rinse thoroughly
For best results on stains rub before rinsing
Add with your detergent:
For tough & dried-in stains x 1
For normal stains x 1/2
Just add one scoop to every wash
Always follow washing instructions on garment or fabric label.
Check for colour fastness by testing a hidden area of the fabric. Rinse and allow to dry.
Replace dosing scoop in product pack only once clean and dry.
For tough stains, it may be required to repeat the process.
Do not use on any garment or rug made of wool, silk or leather.
Do not use on finished or coated surfaces – for example wood, metals, etc.
Do not soak fabrics with metal fasteners or flame-resistant finishes.
Do not expose pre-treated or soaked garments to sources of direct heat or direct sunlight before washing or rinsing thoroughly.
Do not contaminate the product in the tub.
Once mixed, do not leave solution in a sealed container. It will continue to give off oxygen and the container may build up pressure and may leak.
Reclose lid after each use and keep Vanish Oxi Action in a cool dry place.
Keep container dry in a cool place.
VANISH Oxi Action Fabric Stain Remover. Contains Sodium Carbonate Peroxide. Causes serious eye damage. Causes skin irritation. Do not get in eyes, on skin, or on clothing. Wash hands thoroughly after handling. Wear eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a doctor. IF SWALLOWED: Call a doctor if you feel unwell.
For sensitive skin, the use of gloves is recommended.